Change of emergency disarming code

To change the code, you need to know the current emergency disarming code.

The initial the emergency disarming code is given on the owner's card that is included in the delivery set.

КАРТИНКА

You can change the emergency disarming code in several ways:

  • with sending an SMS command.
    Send SMS command 0050XXXXYYYY , where XXXX is the old code, YYYY is the new code.
  • with the valet button.
    To change the emergency disarming code, you must first enter the current code, and then 2 times the new emergency disarming code
  1. Enable disarm mode.
  2. Press 4 times the valet button.
  3. Turn the ignition on. Check the presence of 4 LED signals on the valet button and 4 sound signals.
  4. The transition to the code change mode will be confirmed by 2 signals on the LED and 2 sound signals.

    If there is no action for 5 seconds, the system will automatically exit the mode of changing emergency disarming code.

  5. Turn the ignition off.
  6. Turn the ignition on and press the valet button the number of times corresponding to the first digit of the current emergency disarming code.
  7. Turn the ignition off. The LED on the valet button lights up, the number of flashes will correspond to the ordinal number of the emergency disarming code digit (1, 2, 3 or 4 times).
  8. Repeat steps 6 ... 7 for the remaining digits of the code.
  9. There will be 2 short LED signals and 2 sound signals to confirm the correct code entry.
  10. Turn the ignition on. Press the valet button the number of times corresponding to the first digit of the new emergency disarming code.
  11. Turn the ignition off. The LED on the valet button lights up, the number of flashes will correspond to the number of the emergency disarming code digit (1, 2, 3 or 4 times).
  12. Repeat steps 10 ... 11 for the remaining digits of the new code.
  13. There will be 2 short LED signals and 2 sound signals confirming the acceptance of a new emergency disarming code.
  14. Enter the new code again, repeating steps 10 ... 12.
  15. Followed by 2 short LED signals and 2 sound signals confirming the recording of a new emergency disarming code.

Example of changing the emergency disarming code

It is necessary to change the current emergency disarming code 7184 to the new 5463.

The sequence of actions for changing the code:

  1. Make sure that the security system is in the disarm mode.
  2. Press the valet button 4 times.
  3. Turn the ignition on. There will be 4 LED flashes on the valet button and 4 sound signals
  4. The transition of the complex to the mode of changing the code of the emergency disarming code will be confirmed by 2 short flashes of the LED and 2 sound signals.
  5. Turn the ignition on.
  6. Press the valet button 7 times. Turn the ignition off.
  7. There will be 7 LED flashes on the valet button.
  8. Turn the ignition on.
  9. Press the valet button 1 time. Turn the ignition off.
  10. There will be 1 LED flash on the valet button.
  11. Turn the ignition on.
  12. Press the valet button 8 times. Turn the ignition off.
  13. There will be 8 LED flashes on the valet button.
  14. Turn the ignition on.
  15. Press the valet button 4 times. Turn the ignition off.
  16. There will be 4 LED flashes on the valet button.
  17. There will be 2 short LED signals and 2 sound signals confirming the correct input of the current code.
  18. Turn the ignition on.
  19. Press the valet button 5 times. Turn the ignition off.
  20. There will be 5 LED flashes on the valet button.
  21. Turn the ignition on.
  22. Press the valet button 4 times. Turn the ignition off.
  23. There will be 4 LED flashes on the valet button.
  24. Turn the ignition on.
  25. Press the valet button 6 times. Turn the ignition off.
  26. There will be 6 LED flashes on the valet button.
  27. Press the valet button 3 times. Turn the ignition off.
  28. There will be 3 LED flashes on the valet button.
  29. There will be 2 short LED signals and 2 sound signals confirming the acceptance of a new emergency disarming code.
  30. Turn the ignition on.
  31. Press the valet button 5 times. Turn the ignition off.
  32. There will be 5 LED flashes on the valet button.
  33. Turn the ignition on.
  34. Press the valet button 4 times. Turn the ignition off.
  35. There will be 4 LED flashes on the valet button.
  36. Turn the ignition on.
  37. Press the valet button 6 times. Turn the ignition off.
  38. There will be 6 LED flashes on the valet button.
  39. Press the valet button 3 times. Turn the ignition off.
  40. There will be 3 LED flashes on the valet button.
  41. Followed by 2 short LED signals and 2 sound signals confirming the recording of a new emergency disarming code.