Registration of remote keys, tags and smartphones (full)

Use the device registration mode for registration of new remote keys, tags and smartphones.

To prevent unauthorized adding of new components, entry in the device registration mode is possible only from the disarm.

Tags and smartphones shall be registered in one cycle. At registration of new tags and smartphones all previous tags and smartphones will be deleted from memory. It will be necessary to register them again. In total, up to 5 devices can be registered in the security system.

When new remote keys are registered, all previous remote keys will be deleted from the memory. It will be necessary to register them again. In total, up to 4 remote keys can be registered in the security system.

Entry in the device registration mode

  1. Enable disarm.
  2. Switch off ignition (if it is on).
  3. Press the valet button 7 times.
  4. Switch on the ignition. 7 light signals on the valet button will follow.
  5. Entry in the registration mode will be confirmed by 2 short LED signals.

Remote key registration

  1. Press the remote key buttons 1 and 2 shortly.
  2. In 3 seconds, successful registration will be confirmed by a short sound signal of the remote key and 2 LED signals. If the remote key was not registered, 4 sound signals of the remote key will follow.
  3. Perform items 1 and 2 for each remote key.

Tag registration

  1. Remove the battery from the tag.
  2. Press and hold the tag button and install the battery. The tag LED will light up red.
  3. Release the button and check presence of a series of red flashes for 10 seconds.
  4. Successful registration will be confirmed by a green flash and 2 LED signals. If the tag was not registered, the LED will light up red.
  5. Repeat items 1-3 for the remaining tags.

Smartphone registration

Download the StarLine mobile app from the Google Play store or the App Store.

Register your smartphone with the StarLine  Key mobile application:

  • enable Bluetooth in your smartphone settings;
  • click "Start Search" button;
  • for smartphones on the Android platform, enter the code "000000", on the iOS platform - click the "Create pair" button (no code is required).

Exit from the device registration mode

Exit from the device registration mode is performed automatically in 5 minutes or at ignition switch-off.

Exit from the device registration”mode will be confirmed by 2 LED signals and by signals the number whereof corresponds to the total number of registered remote keys, tags and smartphones.

After registration, an SMS message with the list of registered devices will be sent to the owner’s telephone.