StarLine M13
EN version mock manual
User Manual
General
StarLine M13 universal tracker offers an easy and economy vehicle positioning, live tracking and basic anti-theft security features.
Device can send text message with exact position and link to online map.
It can be quickly mounted in any road vehicles, motorcycles, quad bikes, boats and electric scooters.
Controlled object can be real time monitored on desktop at subscription free starline.online web service and StarLine 2 free mobile app.
Major benefits
- universal input power for various means of transport
- quick installation
- rugged waterproof housing
- lifetime free subscription tracking
- geofence In / Out alert
- tamper alert (shock sensor)
- black box coordinates memory
- remote engine cut
Technical specification
| Features | Values |
|
GSM cellular bands |
850/900/1800/1900 MHz |
|
SIM card |
1 micro-SIM |
|
GSM antenna |
embedded |
|
GPS GLONASS receiver |
embedded |
|
Input power |
9-90 V |
|
Rated standby current |
5 mA
|
|
Water resistance |
IP65 |
|
Operating temperature |
-40 ... +85 °С |
|
Dimensions |
72х30.2х13 mm |
|
Weight |
37 g |
Installation recommendations
Please install device with a qualified specialist assistance.
Note:
Device should be installed facing up towards the sky. The metal thermal barrier or heating layer on windshield may affect a signal. Change the mounting location to improve a signal strength
Connection diagram
This wiring must be done by qualified technician
SIM card installation
Open tracker housing up with flat item and insert SIM card in the slot on the circuit board. Put the plastic cover back.
Sample NC engine cut connection diagram
Universal output (yellow wire) can be used for remote engine blocking like in example below. Max load for universal output – 200 mA (–).
Configuration
Prior to configuration make connections wiring and give power supply
Record an owner phone number (SOS1) to device memory to be able control tracker and receive notifications.
All commands from SOS-number are sent without GSM password. Commands from other phones must be added with the GSM password between command text with comma and # symbol. For example, to request current position send the following text POSITION,1234#, where 1234 — GSM password, POSITION# — command text.
To record an owner phone number as SOS number (if not saved yet), or change SOS number without access to previously saved one, send the text command
SOS,XXXX,A,+XXXXXXXXXX#, where
- ХХХХ — GSM password (4 digits, by default 1234),
- +XXXXXXXXXX — telephone number in international format that must be saved as SOS-number.
To change GSM-password after setting SOS-number make following:
- send SMS-command PWDSW,OFF#
- after receiving a responding message send SMS command PASSWORD,XXXX,YYYY#,
- where XXXX – 4 digits of currentGSM password,
- YYYY – 4 digits of new GSM password
- after receiving a responding message send SMS command PWDSW,ON#
SMS command list
| SMS commands | Description |
|
POSITION# |
Request current location |
|
SOS,XXXX,A,+XXXXXXXXXX# |
Set owner phone number, where XXXX - GSM password (default 1234), +XXXXXXXXXX - owner phone number |
|
SOS,XXXX,D,+XXXXXXXXXX# |
Delete owner phone number |
|
SOS# |
Request owner phone numbers |
|
IMEI# |
Request device IMEI to register on starline. online/mobile app |
|
APN,NAME,LOG,PSW# |
Set network access point, where: NAME - apn name, LOG - user login, PSW - password |
|
GPRSSET# |
Request network status |
|
STATUS# |
Request device status |
|
PASSWORD,OLD,NEW# |
Change GSM password, where OLD - old (default) password, NEW - new password |
|
PWDSW,OFF# |
Switch GSM password Off (from SOS1 owner number) |
|
PWDSW,ON# |
Switch GSM password On (from SOS1 owner number) |
|
PRELAY,1# |
Activate universal output (from SOS1 number only) |
|
PRELAY,0# |
Deactivate universal output (from SOS1 number only) |
|
PARAM# |
Request configuration parameters |
|
RESET# |
Reboot device |
|
FACTORY# |
Reset device to factory settings |
Registration
1. install StarLine 2 app or browse starline.online web service
2. register a new StarLine account
3. select Add device menu and follow the guide