StarLine M18 PRO EN version mock manual User Manual General StarLine M18 Pro tracking device allows to determine an object location with GPS and GLONASS global satellite navigation systems.  Devices can be fitted in a car, boat or a cargo. Real time tracking is available at starline.online free web service and in StarLine mobile app.  Tracker will send SMS message with a web-link to an object coordinates on request from an owner. Technical features Parameters Values GSM band 2G 850 900 1800 1900 MHz SIM card slot 1 NanoSIM GSM antenna embedded GPS GLONASS receiver embedded Interfaces 1 microUSB GPS GLONASS receiver sensitivity –148dBm — “cool” start –163dBm — “hot” start –165dBm — in tracking mode Power supply 8 – 32 V Working temperature range -40 ... +85 °С Main unit dimensions 64х44х13,5 mm Weight 33 gr Tracker connection SIM-card installation Open the device box with metal thing and insert SIM-card in the slot on circuit board. Put the board and cover back. Fitting recommendations Place the tracker so that it’s lid with StarLine logo is directed towards the sky. Device should not be shielded with metal parts and materials. GPS+GLONASS signal can penetrate glass, plastics, dashboard and doors decoration, but can not go through metal body parts, metal tint films and other metal surfaces StarLine M18 connection diagram Connect tracker to the lighter socket with adapter. The power is not supplied with USB connection to computer StarLine M18 Pro connection diagram Apply to a qualified fitter for this way of installation Housing LED indication After power activation the LED on the tracker housing is continuously lighting withing one hour, then begins flashing  once per 10 sec. Light color Interpretation green connection with server established, GPS+GLONASS coordinates determined red power is On, no connection with server blue connection with server established, GPS+GLONASS coordinates not determined violet device is connected to computer with StarLine Master program loaded Monitoring Real time object tracking is available at starline.online free web platform or in free StarLine mobile application. Tracker has 3 monitoring modes: tracking by motion sensor In this mode tracking of object begins with moving continuous tracking (default) In this mode an object location is permanently monitored. tracking at every 30 min In this mode tracker activates GPS+GLONASS receiver every 30 min. If satellites are not found, the receiver will be disabled after 5 min. The monitoring mode can be selected in StarLine Master software Tracker configuration Register the owner tel. number (M1) in tracker memory to be able control the tracker and receive notifications. Commands from M1 number are sent without GSM-password. To send commands from other numbers need to add GSM-password in beginning of SMS command text (for example, to request vehicle positioning send following SMS - command: 1234 40 , where 1234 – GSM -password, 40 – command code). Use following SMS-command to register M1 telephone number and GSM-password: XXXX M1 YYYY TEL , where ХХХХ – service code, specified in the personal plastic card, YYYY – your GSM-password, TEL – M1 owner telephone number in international format. GSM commands list GSM command Command description 40   Location request GPS XXX SIM-card balance request, where XXX – operator USSD command code 45   Request for location and GSM+GPRS signal quality BALANCE MONEY 06   GSM-password request GSMPSW? 07   Request for the registered telephone numbers TEL PHONES 09 Request for GSM signal quality and firmware version INFO 0000ХХХХ     Record new guest GSM - password, GSMPSWХХХХ where ХХХХ - new password 0000 ХХХХ GSMPSWХХХХ GSMPSW ХХХХ 00011XXX Record new М1 tel. number,  where XXX – new tel. number in international  format +12345978910.  М1 owner tel. number cannot be deleted 00011 XXX M111XXX M111XXX 9900PIN1XXX   Emergency M1 tel. number changing: PIN – emergency disarm code (from guest tel. numbers the WM1PIN1XXX GSM-password should be added before) XXX – new tel. number. Tel. number in international format should begin with “+”, then country code and local number of at least 5 digits. This command can be sent from any tel. number. 9900 PIN 1 ХХХ WM1PIN1XXX 00961 Require for GSM-password from M1 M1PSW+ 00960 Do not require for GSM-password from M1 M1PSW- 00550 Disable GPRS GPRS- 00551 Enable GPRS GPRS+ GPRS? GPRS status request 00520 Disable SMS-alert on switch to roaming 00521 Enable SMS-alert on switch to roaming 00522 Enable SMS-alert on switch to roaming with automatic GPRS disabling 00523 Enable GPRS in roaming 00524 Disable GPRS in roaming APN NAME LOGIN PSW Record Internet access APN for active SIM-card, where: NAME - APN address, mandatory parameter (for example, internet.mts.ru) LOGIN PSW – login and password for access, not mandatory parameters (for example, mts mts) If no any parameter is specified, so APN settings will be erased