# Device registration

Registration mode is used to pair tags, smartphones and wireless relay StarLine R6.

<p class="callout warning">To prevent unauthorized registration of new accessories, entry to registration mode is permitted in Disarmed mode only. If Immobiliser mode enabled then authorization must be passed to fully disarm a system</p>

<p class="callout warning">Tags and smartphones shall be registered in one registration cycle. All previously paired tags and smartphones (except for StarLine R6 relay module) will be deleted from memory if not paired again together with the new ones</p>

<p class="callout info">Total amount of accessories can be registered in the system main unit: 5 wireless tags or 4 smartphones</p>

<p class="callout info">Complete all device registration steps without long pauses between them</p>

##### **Entry to device registration**

1. disarm system if it is armed
2. send SMS command **REG ХХХХ**, where **ХХХХ** is emergency disarm code
3. wait for SMS message confirming entry to registration mode

<p class="callout warning">If invalid emergency disarm code is sent 3 times, then entry to device registration will be blocked for 15 min, and alert SMS will be sent to owner's M1 phone number</p>

##### **Wireless tags (transponders) registration**

1. Remove battery from a tag slot
    
      
    <span class="confluence-embedded-file-wrapper confluence-embedded-manual-size">![12.png](https://help.starline.ru/uploads/images/gallery/2023-11/12.png)</span>
2. Push and hold tag button and insert battery back in slot observing the right polarity (“+” side top). The tag LED will light up red
    
    <span class="confluence-embedded-file-wrapper confluence-embedded-manual-size">![13.png](https://help.starline.ru/uploads/images/gallery/2023-11/13.png)</span>
3. Release button and make sure a tag LED serial red flashes come up for 10 seconds
    
      
    <span class="confluence-embedded-file-wrapper confluence-embedded-manual-size">![14.png](https://help.starline.ru/uploads/images/gallery/2023-11/14.png)</span>
4. Successful registration will be confirmed by a tag LED green flash and SMS message.   
    If a tag pairing failed then its LED will light up red
    
      
    <span class="confluence-embedded-file-wrapper confluence-embedded-manual-size">![green 2 times.png](https://help.starline.ru/uploads/images/gallery/2024-06/green-2-times.png)</span>
5. Repeat items 1-3 for the remaining tags

##### **Smartphone registration**

1. enable Bluetooth in smartphone and activate device searching
2. select "StarLine M66 v2" in available devices list
3. enter pairing code 000000 (for iOS click "Pair")

<p class="callout info">If multiple registered smartphones are in range at the same time, the system will only work with the first one to connect</p>

##### **Exit from the device registration mode**

System will automatically exit from device registration mode in 5 minutes.

Successful device registration will be confirmed by an SMS with a list of registered devices.