Device registration

Registration mode is used to pair tags, smartphones and wireless relay StarLine R6.  

 To prevent unauthorized registration of new accessories, entry to registration mode is permitted in Disarmed mode only. If Immobiliser mode enabled then authorization must be passed to fully disarm a system 

 Tags and smartphones shall be registered in one registration cycle. All previously paired tags and smartphones (except for StarLine R6 relay module) will be deleted from memory if not paired again together with the new ones 

 Total amount of accessories can be registered in the system main unit: 5 wireless tags or 4 smartphones 

 Complete all device registration steps without long pauses between them 

 Entry to device registration 

 

 

 disarm system if it is armed 

 

 

 send SMS command REG ХХХХ , where  ХХХХ is emergency disarm code 

 

 

 wait for SMS message confirming entry to registration mode 

 

 

 

 If invalid emergency disarm code is sent 3 times, then entry to device registration will be blocked for 15 min, and alert SMS will be sent to owner's M1 phone number 

 

 Wireless tags (transponders) registration 

 

 

 Remove battery from a tag slot 

 

 

 Push and hold tag button and insert battery back in slot observing the right polarity (“+” side top). The tag LED will light up red 

 

 

 Release button and make sure a tag LED serial red flashes come up for 10 seconds 

 

 

 Successful registration will be confirmed by a tag LED green flash and SMS message.  If a tag pairing failed then its LED will light up red 

 

 

 Repeat items 1-3 for the remaining tags 

 

 

 

 Smartphone registration 

 

 enable Bluetooth in smartphone and activate device searching 

 select "StarLine M66 v2" in available devices list 

 enter pairing code 000000 (for iOS click "Pair") 

 

 If multiple registered smartphones are in range at the same time, the system will only work with the first one to connect 

 Exit from the device registration mode 

 System will automatically exit from device registration mode in 5 minutes. 

 Successful device registration will be confirmed by an SMS with a list of registered devices.