# Emergency disarming

System can be fully disarmed with emergency disarm code (find it on the sticker inside printed manual), when:

- tag is lost or discharged
- no access to mobile app or starline.online account
- vehicle is immobilised in Anti-hijack mode

##### **Emergency disarming with standard buttons or driver door**

1. while armed, switch ignition On - system turns to alarm
2. press and hold brake pedal
3. wait for 2 sec, then press any standard vehicle button (or open and close driver's door) the number of times matching the first digit of emergency disarm code
4. wait for 2 sec and release brake - buzzer or siren (if connected) confirms entry with sounds matching the digit number
5. repeat steps 2 - 4 for remaining digits
6. valid code will be confirmed with 2 sounds and system shall disarm. If invalid code entered, system shall remain in alarm and vehicle immobilised

<p class="callout warning">Note! Emergency disarm code and service code are generated randomly at factory and never stored anywhere for security reasons. It cannot be recovered once lost ! Strongly recommend to copy it in a safe place and record in StarLine mobile app: Settings - General information - Device codes</p>

<p class="callout warning">If invalid code is entered 3 times, then next attempts will be blocked for 15 min</p>

<p class="callout info">System should be able to read statuses of ignition, brake pedal, at least one standard button or a driver door trigger from CAN bus.   
Check your vehicle's CAN bus supported statuses at can.starline.bz</p>


##### **Emergency disarming by SMS**

To emergency disarm, send SMS text command 30 XXXX, where XXXX is emergency disarm code.

<p class="callout info">If invalid code is sent 3 times, then next attempts will be blocked for 15 min, and owner will be notified on it with SMS alert</p>