Emergency disarming

System can be fully disarmed with emergency disarm code, when:

Emergency disarming with service button

  1. Make sure ignition is switched On


    on.png
  2. Push service button or external transceiver button a number of times, equal to the first digit of emergency disarm code
    push x times.png         

  3. Each digit entry will be confirmed within 3 sec with service button LED flashes in a number equal to a sequence number of corresponding digit entered (1,2, 3 or 4 times)

Screen Shot 2025-02-09 at 22.46.35.png

4. Repeat 1...2 steps for remaining digits

5. Valid code entry is confirmed with 3 flashes and 3 sounds, system turns disarm

If invalid emergency disarm code is entered 3 times, then next entry shall be blocked for 15 min. Each button push in this interval will be indicated with 5 flashes

Example of entry the code 5342

Screen Shot 2025-02-09 at 22.50.58.png

Emergency disarming with SMS text message

Send SMS text command  30 XXXX , where ХХХХ — emergency disarm code

Changing emergency disarm code with service button (or external transceiver button)

  1. switch system in disarmed mode if it is armed

  2. push service button 4 times

  3. switch ignition On. 4 LED flashes and 4 sounds shall follow

  4. entry into code recording will be confirmed with 2 LED flashes and 2 sounds

If nothing is done withing 5 sec system shall turn Off emergency code recording mode

5. switch ignition Off
6. switch ignition On and push service button a number of times equal to a first digit of existing emergency disarm code
7. switch ignition Off. Each digit entry will be confirmed with LED flashes equal to a sequence number of corresponding digit entered (1,2, 3 or 4 times)
8. repeat 6...7 steps for remaining digits
9. valid existing code entry will be confirmed with 2 LED flashes and 2 beep sounds
10. switch ignition On. Push service button a number of times equal to a first digit of a new emergency disarm code
11. switch ignition Off. Each digit entry will be confirmed with LED flashes equal to a sequence number of corresponding digit entered (1, 2, 3 or 4 times)

12. repeat 10...12 steps for remaining new code digits
13. new code entry will be confirmed with 2 LED flashes and 2 beep sounds
14. enter a new code once again repeating 10...12 steps
15. new emergency disarm code recording will be confirmed with 2 LED flashes and 2 beep sounds