Owner authorisation code (PIN-to-Drive)

Pin-to-Drive code entered with factory buttons is used for secondary owner authorisation at disarming and immobiliser mode. 

 Recording and changing authorisation PIN code in registration mode: 

 

 

 Disarm system if it is armed 

 

 

 Switch ignition Off if it is On 

 

 

 Push service button or external transceiver button 7 times 

 

 

 Switch ignition On. 7 LED flashes and 7 beep sounds shall follow 

 

 

 Entry into registration mode will be confirmed with 2 LED flashes and 2 beep sounds 

 

 

 Enter a new PIN code with use of supported factory buttons with 3 sec and less intervals. Each pushing will be indicated with one LED flash 

 

 

 

 Authorisation PIN code may consist of 2 to 25 push sequence of factory buttons. List of supported factory buttons is published at can.starline.bz for each supported vehicle. If pushing a button is not indicated with a LED flash, then this button is not supported via CAN bus 

 7. Code entry will be confirmed in 3 sec with 2 LED flashes and 2 beep sounds 

 

 8. Enter a new Pin code once again 

 9. Properly repeated new code entry will be confirmed with 2 LED flashes and 2 beep sounds. Invalid code entry is followed with 4 LED flashes and 4 sounds, then repeat 5...8 steps 

 

 10. Switch ignition Off within 10 sec to exit registration mode 

 

 11. Exit from registration mode will be confirmed with 2 LED flashes and 2 beep sounds 

 

 Deleting authorisation PIN code 

 

 

 Disarm system if it is armed 

 

 

 Switch ignition Off if it is On 

 

 

 Push service button or external transceiver button 7 times 

 

 

 Switch ignition On. 7 LED flashes and 7 beep sounds shall follow 

 

 

 Entry into registration mode will be confirmed with 2 LED flashes and 2 sounds 

 

 

 Push service button 3 times 

 

 

 Wait for the long LED light up confirming that existing authorisation PIN code has been erased from memory 

 

 

 Switch ignition Off 

 

 

 Exit from registration mode will be confirmed with 2 LED flashes and 2 beep sounds