GSM control commands
Complex control by means of GSM commands is only possible if the GSM module is available.
The telephone number, from which the first call to the complex number was made, will be recorded automatically as the owner’s main number. All commands from this number are sent without a GSM-password. To send commands from other numbers, a password shall be entered in the beginning of the command text (for instance, send the following SMS-message for security activation “1234 11”, where 1234 — GSM password, 11 — command number).
The GSM-password is set from the owner’s main number at the first call.
The control commands are given in the table.
|
SMS command text
|
Command meaning
|
|---|---|
| 10 | Deactivate security |
| О- | |
| 11 | Security activation |
| О+ | |
| 12 | Security activation without shock sensor |
| 13 | Security activation without an additional sensor |
| 14 | Security activation without preliminary level of the shock sensor |
| 15 | Security activation without tilt sensor and motion sensor |
| 19 | Activation of the «Panic» mode |
| PANIC | |
| 20 | Remote engine stopping |
| D- | |
| 21 | Remote engine starting |
| D+ | |
| 220 | Switch off of the starting pre-start engine heater |
| 221 | Switch on of the starting pre-start engine heater |
| 30 XXXX | Deactivation of the «Anti hijack» mode, where хххх is the code of emergency security deactivation is given on the owner’s plastic card |
| A-XXXX | |
| 31 | Activation of «Anti hijack» mode |
| A+ | |
| 40 | Car coordinate request |
| GPS | |
| 41 | Car state request |
| AUTO | |
| 45 | Request about the state of GSM/GPRS connection and balance data |
| BALANCE | |
| MONEY | |
| 50 | Deactivation of the service mode |
| S- | |
| 51 | Activation of the service mode |
| S+ | |
| 70 | Deactivation of the «Hands free mode» |
| R- | |
| 71 | Activation of the «Hands free mode» |
| R+ |