Результаты поиска

System can be controlled with voice and SMS text commands from the owner master phone number (M1) and additional registered numbers (M2, M3, M4). The first incoming call telephone number shall be automatically recorded as M1 master number. All commands receiv...

Registration mode is used to pair new remote keys, tags, smartphones and other wireless and wired accessories to the system main unit. To prevent unauthorized registration of new accessories, entry to registration mode is permitted in Disarmed mode only. If I...

System can be fully disarmed with emergency disarm code, indicated on owner ID card, when: Tag is lost Tag or remote key battery discharged Anti hijack mode is activated Emergency disarming with service button Make sure ignition is...

Pin-to-Drive code entered with factory buttons is used for secondary owner authorization at disarming and immobilizer mode. Recording and changing authorization PIN code in registration mode: Disarm system if it is armed. Switch ignition Off if it i...

When visiting an installation center for the installation and configuration of the immobilizer, we recommend that you draw the installer’s attention to the programmable options designed to provide additional comfort and security during the use of the device. ...

Event Tag (LED) Sound indication Notes Warning of upcoming engine blocking — intermittent sound signals Take action to stop the car Discharged tag battery 3 sound signals Install new battery Norm...

The differences between the kits and the delivery sets are presented in the table: № Component i95 ECO i95 i95 LUX 1 User manual 2 Installation manual 3 Plastic card 4 Tag with battery, 2 pcs. 5...

Blocking module Parameter Value Frequency range of control radio signals, GHz 2.4 Type of control code dialogue Maximum coverage range up to 10 meters (*) Ingress Protection IP67 Supply Voltage, V 9–16 Consumption c...

The device is supplied with text and color markings Diagram of external outputs Designation of external outputs All blocking module wires are marked white. Marking Designation GND Ground (– BAT Power supply (+) IGN Ignition ...

The StarLine i95 ECO, i95, and i95 LUX immobilizers are designed for installation on vehicles and motorcycles with a 12V electrical system. Before installing the immobilizer, ensure the vehicle's electrical circuits are functioning correctly and that ...

Power Connection The GND wire of the blocking module must be connected to the vehicle body or a conductor reliably connected to the body. This wire should be connected first during installation. Ensure the module receives power via the BAT terminal, and this...

For quick and convenient setting of immobilizer parameters on a computer, download the special application «StarLine Master». Detailed information about configuring the immobilizer using the desktop application can be found in the manual in the "Help" sectio...

The programming mode is intended for configuring the parameters of the immobilizer. Switching to programming mode from security mode requires entering the service code. Switching to programming mode from service mode is not possible (indicated by yellow li...

To prevent unauthorized tag registration, entry in the device registration mode is possible only after entry of the unlocking code. For registration of new components the immobilizer should be set to the device registration mode using the unlocking code. The p...

1) __________________________________________ 2) __________________________________________ 3) __________________________________________ Installiation date: ______________________________ Service code: ______________________________

Please read carefully! Before operating the security system, carefully read this manual and pay special attention to sections marked with an exclamation point . To determine if this security system is suitable for your vehicle, refer to the vehicle manufactur...

The StarLine A90, Starline A60 security-telematics complexes (hereinafter referred to as the complex) are designed to protect motor vehicles from theft and armed attacks.  The complex is controlled using a remote key. Key Features ...

Parameter Value Remote Key Operating Frequency 868.7–869.2 MHz Remote Key Control Range Up to 1500 meters Notification Range on Remote Key Up to 2000 meters Interfaces 1 Universal StarLine Bus 1 USB 23 Configurable Chan...

The security complex provides various options for indicating modes such as "Disarmed", "Armed", and "Alarm": Hidden: Light and sound indicators are disabled. Silent: Only light indicators are enabled. Sound: Only sound indicators are enabled. Full: Both ...

Remote Keys The complex's memory can be programmed with two types of remote keys: Remote key with LCD (liquid crystal display).      The remote key with LCD uses a AAA 1.5 V battery. The battery life of the remote key with LCD is up to 6 months dependi...