Перейти к основному контенту

GSM control and GPS navigation

StarLine.online and mobile app

StarLine system can be remotely controlled and monitored on the starline.online web tracking platform and StarLine mobile app with life time free subscription.

Make sure that a proper local SIM card with active balance, internet traffic and permission to operate with M2M smart devices is installed and configured at installation.

SIM card boot PIN code must be disabled prior to inserting into the main unit. 

Make sure the local network support cellular standards and bands described in device technical specification.

1. Download StarLine 2 mobile app from your phone store (App Store, Google Play, Huawei AppGallery) or browse starline.online web tracking service

2. Register a new or sign in to existing StarLine account

3. Go to "Device adding" ("+" button) menu on the main screen, select "Add new device" — Next — "GSM module, alarm

system, smart tracker" — "Use activation code"

4. Enter the one-time activation code printed on attached sticker

5. System will be registered on server and appear in device list on the main screen

Activation code can not be used again to add device into another account. Use SMS command 00581 and the one-time PIN code in this case.

Скрин СЛ Онлайн.png       скрин.jpg

Cellular commands

System can be controlled with voice and SMS text commands from the owner master phone number (M1) and additional registered numbers (M2, M3, M4).

The first incoming call telephone number shall be automatically recorded as M1 master number. All commands received from M1 number are executed without a GSM PIN code in default configuration. PIN code is recorded by owner at initial call from M1 number. Also, this number sets up control permissions for M2, M3, and M4 phones.

Commands from guest phones are executed with PIN code in the beginning, i.e. system arming command: 1234 11; where 1234 – PIN code, 11 – arming command number.

If invalid password is entered twice from the guest number, commands from that number will be blocked for 1 hour, and alert message will be sent to the owner's M1 number

Voice call commands
Command
Function
М1 
М2, М3, М4
Guest phones
 0 
 Listen commands menu

image.png

image.png

image.png
 10 
 Disarming

image.png

image.png

image.png

 101 

 Silent disarming

image.png

image.png

image.png
 11 
 Arming

image.png

image.png

image.png

 111 

 Silent arming

image.png

image.png

image.png

 12 

 Arming with shock sensor disabled

image.png

image.png

image.png
 13 

Arming with auxuliary sensor disabled

image.png

image.png

image.png
 14 

Arming with shock sensor warning level disabled

image.png

image.png

image.png
 15 
 Arming with tilt sensor disabled

image.png

image.png

image.png
 31 
 Activate Anti-hijack mode

image.png

image.png

image.png
 40 
 Request location

image.png

image.png

image.png
 41 
 Request vehicle state

image.png

image.png

image.png
 50 
 Disable Service mode

image.png

image.png

image.png
 51 
 Enable service mode

image.png

image.png

image.png
 70 
 Disable Hands Free

image.png

image.png

image.png

 71 

 Enable Hands Free

image.png

image.png

image.png
SMS text commands
Text commands Function М1 М2, М3, М4 Guest phones

 10 

 Disarming

image.png

image.png

image.png

 ARM- 
 О- 

 101 

 Silent disarming

image.png

image.png

image.png

 11 

 Arming

image.png

image.png

image.png
 ARM+ 
 О+ 

 111 

 Silent arming

image.png

image.png

image.png

 12 

 Arming with shock sensors disabled

image.png

image.png

image.png
 13 

Arming with auxuliary sensor disabled

image.png

image.png

image.png
 14 

Arming with shock sensor warning level disabled

image.png

image.png

image.png
 15 
 Arming with tilt sensor disabled

image.png

image.png

image.png
 19 
 Panic activation

image.png

image.png

image.png
 PANIC 
 40 
 Request location

image.png

image.png

image.png
 GPS 
 41 

Request vehicle state

image.png

image.png

image.png
 AUTO 
 45 

Request cell connection status and SIM card balance

image.png

image.png

image.png
 BALANCE 
 MONEY
 30 ХХХХ 

Emergency disarming, 

where  XXXX   - emergency disarm code from sticker with codes in your manual.

image.png

image.png

image.png
 A- ХХХХ 
 31 
 Activate Anti-hijack mode

image.png

image.png

image.png
 А+ 
 50 
 Disable Service mode

image.png

image.png

image.png
 S- 
 51 
 Enable Service mode

image.png

image.png

image.png
 S+ 
 69 

Activate video recorder (dashcam)

image.png

image.png

image.png
 VIDEOREG 
 70 
 Disable Hands Free

image.png

image.png

image.png
 R- 
 71 
 Enable Hands Free

image.png

image.png

image.png
 R+ 
 VALIDATOR- 

Reset PIN-to-Drive code by factory buttons

image.png

image.png

image.png

 8N 

Activate FlexibleLogic program, where N – program number

 

image.png

image.png

image.png

 SETTING+ 

Enter configuration via BLE

image.png

image.png

image.png

 SETTING- 

 Exit configuration via BLE

image.png

image.png

image.png

 FWUPDATE VER LANG 

Firmware update via internet, where VER – firmware version number (can be written without dots, optional parameter)
LANG — firmware language version (optional parameter): EN, FR, DE, ES, IT, RU
If no any parameter added, then the latest release version and same language firmware is uploaded

image.png

image.png

image.png
 FWUPDATE STOP 
 Stop firmware update via internet

image.png

image.png

image.png

 FWUPDATE? 

Request status of firmware updating via internet

image.png

image.png

image.png
Info commands
Text commands Function М1 М2, М3, М4 Guest phone

 REG ХХХХ 

Entering "Device Registration" mode, where XXXX - emergency disarm code

      58aimage.png

        58aimage.png

image.png

 05 

Request registered accessories list

58aimage.png

image.png

image.png
 REG? 

 06 

Request current GSM PIN code

image.png

image.png

image.png
 GSMPSW? 

 07 

Request registered master phone numbers

image.png

image.png

image.png
 TEL 
 PHONES 

 09 

Request GSM signal strength, battery voltage, firmware version status

image.png

image.png

image.png
 INFO 
GSM settings commands
Text commands Function М1 М2, М3, М4 Guest phone

 0000ХХХХ 

Record new GSM PIN code, where   ХХХХ  — new PIN code.

image.png

image.png

image.png

 0000 ХХХХ 

 GSMPSWХХХХ 
 GSMPSW ХХХ 

 0050XXXXYYYY 

Record new emergency disarm code,

  • where  XXXX  — current code;
  •  YYYY  — new code.

image.png

image.png

image.png
 0050 XXXX YYYY 
 PINXXXXYYYY
 PIN XXXX YYYY 

 0001XYXXX 

Record new М1 phone number, where:

  • where  X  — alert call at alarm (1 —On, 0 — Off);
  •  Y  — SMS alert at alarm (1 — On, 0 — Off);
  •  XXX  — new phone number in international format +75555555555.

М1 phone number can not be deleted.

image.png

image.png

image.png
 0001 XY XXX 
 M1XYXXX 
 M1 XY XXX 

 0002XYXXX 

Record new М2 phone number, where:

  •  X  — alert call at alarm (1 —On, 0 — Off);
  •  Y  — SMS alert at alarm (1 — On, 0 — Off);
  •  XXX  — new phone number in international format +75555555555.

If XY parameters and phone number not entered, then current M2 number will be deleted.

image.png

image.png

image.png
 0002 XY XXX 
 M2 XY XXX 
 M2XYXXX 

 0003XYXXX 

 

Record new М3 phone number, where:

  • where  X  — alert call at alarm (1 —On, 0 — Off);
  •  Y  — SMS alert at alarm (1 — On, 0 — Off);
  •  XXX  — new phone number in international format +75555555555.

If XY parameters and phone number not entered, then current M3 number will be deleted.

image.png

image.png

image.png
 0003 XY XXX 
 M3XYXXX 
 M3 XY XXX 

 0004XYXXX 

 

Record new М4 phone number, where:

  • where  X  — alert call at alarm (1 —On, 0 — Off);
  •  Y  — SMS alert at alarm (1 — On, 0 — Off);
  •  XXX  — new phone number in international format +75555555555.

If XY parameters and phone number not entered, then current M4 number will be deleted.

image.png

image.png

image.png
 0004 XY XXX 
 M4XYXXX 
 M4 XY XXX 

 ZZZZ9900PINXYXXX 

Emergency changing M1 phone number:

  •  ZZZZ  — GSM PIN code;
  •  PIN  — emergency disarm code;
  • X  — alert call at alarm (1 — On, 0 — Off);
  •  Y  — SMS alert at alarm (1 — On, 0 — Off);
  •  XXX  — new phone number in international format +75555555555.

This command can be sent from any phone number.

image.png

image.png

image.png
 ZZZZ 9900 PIN XY ХХХ 
 ZZZZEM1PINXYXXX 

 009401 

Enable all control commands for М2 as forМ1

image.png

image.png

image.png
 М2+ 

 009400 

 Disable all control commands for М2 as for M1

image.png

image.png

image.png
 М2- 

 009500 

Enable control commands from guest phones

image.png

image.png

image.png
 GUEST+ 

 009501 

Disable control commands from guest phones

image.png

image.png

image.png
 GUEST- 

 00961 

Enable GSM PIN request for М1

image.png

image.png

image.png
 M1PSW+ 

 00960 

Disable GSM PIN request for М1

image.png

image.png

image.png
 M1PSW- 
 APN? 
 Request active SIM card APN

image.png

image.png

image.png
 APN NAME LOGIN PSW 

Record APN for active SIM card, where:

  •  NAME  —  APN name (mandatory parameter)
  •  LOGIN PSW  — login and password for access (optional parameters).

If no any parameters entered, then current APN settings will be deleted.

image.png

image.png

image.png
 00520 
 Disable notification on switching to roaming

image.png

image.png

image.png
 00521 
 Enable notification on switching to roaming

image.png

image.png

image.png
 00522 
 Enable notification on switching to roaming with automatic data internet off

image.png

image.png

image.png
 00523 
 Enable data internet in roaming

image.png

image.png

image.png
 00524 
 Disable data internet in roaming

image.png

image.png

image.png

 0069Х 

Setting interval of forwarding all incoming SMS from unregistered numbers and USSD from cell carrier to M1 phone, where:

 X  — interval in min (1 - 60 min).

image.png

image.png

image.png

 FORWARD X 

SIM cards switching
Text command
Function
М1
М2, М3, М4
Guest phones
 SIMMAIN X 

Record priority SIM card, where:

 X  — priority operation SIM card (0 — no priority SIM card, both are equal; 1 — 1st SIM is main, 2nd SIM card is supplementary; 2 — 2nd SIM is main, 1st SIM card is supplementary).

Value 1 is set as default.

image.png

image.png

image.png

 SIMMAIN? 

 Request current SIM cards priority

image.png

image.png

image.png

 SIMNUM? 

 Request operating SIM cards number

image.png

image.png

image.png
Periodic connection mode control (Beacon mode)
Text command Function M1 М2, М3, М4 Guest phone
 MAYAK+ 

Enable periodic connection mode (Beacon mode)

image.png

image.png

image.png
 MAYAK- 

Disable periodic connection mode (Beacon mode)

image.png

image.png

image.png
Auxiliary commands
Text command Function M1 М2, М3, М4 Guest phone

 K1+ 

Universal output №1 On

image.png

image.png

image.png

 K1- 

Universal output №1 Off

image.png

image.png

image.png

 K2+ 

Universal output №2 On

image.png

image.png

image.png

 K2- 

Universal output №2 Off

image.png

image.png

image.png

 K3+ 

Universal output №3 On

image.png

image.png

image.png

 K3- 

Universal output №3 Off

image.png

image.png

image.png
Наверх